![]() | Up a level |
Abram, Timothy John. (2007). An investigation into zero speed roll motion damping devices. [Final Year Project]
Adeline, Ben. (2004). The viability of resin infusion for the manufacture of a standard production hull. [Final Year Project]
Agan, Erdem. (2005). 24m traditional wooden bodrum gullet. [Final Year Project]
Albaladejo, Jose Damian. (2005). 32ft IRC sailing vessel. [Final Year Project]
Alessio, L G and Souppez, Jean-Baptiste R. G. and Hage, A. (2016). Design evaluation and alteration of the Dark Harbor 17.5: Case study of a modern replica. In: Historic Ships.
Alessio, L G and Souppez, Jean-Baptiste R. G. and Hage, A. (2016). Design evaluation and alteration of the Dark Harbor 17.5: Case study of a modern replica. In: Historic Ships.
Alldis, Daniel. (2013). Preliminary design of a two phase mini-maxi race yacht. [Final Year Project]
Allegrini, Michele. (2010). Alaia 46: RTW eco-cruising sailing yacht. [Final Year Project]
Alsamari, Faisal. (2013). Personal solar array design of a collapsible mechanism. [Final Year Project]
Amey, Stephen. (2004). A study into the seriousness of "osmosis" in FRP construction. [Final Year Project]
Anastasia, Edoardo. (2001). The preliminary design of a 40' racer for the Adriatic Open Circuit. [Final Year Project]
Antony, Rukshila. (2002). Pilot boat for the Solent. [Final Year Project]
Arkell, Joshua James. (2012). Design & Production of a 10.6m RIB for Multiple Applications. [Final Year Project]
Armand, Agathe. (2008). Preliminary design of a 22m expedition sailing yacht for charter. [Final Year Project]
Armand, Agathe. (2008). Preliminary design of a 22m expedition sailing yacht for charter. [Final Year Project]
Aviles Ramos, A. (1998). A 60 foot ocean racing catamaran. [Final Year Project]
Azevedo, Francisco. (2009). The design of a class 40 ocean racer. [Final Year Project]
Bagworth, Richard T.. (2002). The preliminary design of a J Class yacht (Gateless Kingdom). [Final Year Project]
Baker, Eleanor Jane. (2003). Preliminary design of a 14m-15m Blue Water Cruiser. [Final Year Project]
Baker, Alex. (2013). A real time diagnostic and monitoring system for a web tension load cell transducer. [Final Year Project]
Baker, Clive and Parry, Bryn. (2016). Commemorating and communicating contested narratives in a digital era - lessons from Dark Tourism. In: Business and Society Research & Innovation Hub workshop, Southampton Solent University.
Barkway, Luke. (2005). Preliminary design of a 21m express charter yacht. [Final Year Project]
Barnett, Michael. (2005). Searching for the root causes of maritime casualties – individual competence or organisational culture? WMU Journal of Maritime Affairs, 1 October 2005, 4 (2), pp. 131-145
Barnett, Michael and Lang, D and Stephenson, C. (2005). Shipboard manning: alternative structures for the future? WMU Journal of Maritime Affairs, 1 April 2005, 4 (1), pp. 5-33
Barnett, Michael and Overgaard, B and Pekcan, Claire and Gatfield, David. (2006). Barriers to progress or windows of opportunity? A study in career path mapping in the maritime industries. WMU Journal of Maritime Affairs, 1 October 2006, 5 (2), pp. 127-142
Barnett, Michael and Pekcan, C and Gatfield, D and Northcott, L. (2007). The mitigation of human error in the use of automated shipboard systems. In: Proc. Int Conf. Human Factors in Ship Design and Operation. RINA. February 2005.
Barnett, Michael. (2004). Risk Management training: the development of simulator-based scenarios from the analysis of recent maritime accidents. In: Proceedings of the Advances in International Maritime Research Conference, Tasmania. IAMU, Tasmania.
Barnett, Michael and Gatfield, David and Habberley, John. (2002). Shipboard Crisis Management: A Case Study. Proceedings of the Human Factors in Ship Design and Operation Conference., 2002,
Barnett, Michael and Gatfield, David and Pekcan, Claire. (2003). A Research Agenda in Maritime Crew Resource Management. Proceedings of the International Conference on Team Resource Management in the 21st Century., 2003,
Barrero Ponce, Borja. (2010). (UNICat) solar-wind sailing catamaran design. [Final Year Project]
Barrett, Alasdair. (2013). To develop a system capable of deploying an existing lifeboat when the host vessel's heel angle exceeds 20 degrees. [Final Year Project]
Bartlett, Mark. (2008). An investigation into the variation of the tensile properties of epoxy resin with colloidal silica. [Final Year Project]
Batten, Samuel Richard. (2015). The design of a 16 metre SWATH research vessel. [Final Year Project]
Beacom, S. (2000). The Preliminary Design of a Fast Ferry for Nantucket. [Final Year Project]
Beaugeard, Alexander. (2001). The preliminary design of a marine ambulance for the Channel Islands. [Final Year Project]
Becquet, Remy. (2005). 37' performance day boat. [Final Year Project]
Beecher, Stephen J.. (2003). Design for a long range insertion craft for use by the special forces. [Final Year Project]
Bertail, Jeanne. (2003). 14m cruising sailing catamaran. [Final Year Project]
Berthelot, Jean-Pascal. (2005). Design of a 12m stylish cruiser racer yacht. [Final Year Project]
Bertrand, Charles. (2005). Design of a 40' offshore racer compliant with the class 40 rule. [Final Year Project]
Biferali, Mario. (2011). Design of a 50' fast cruising sailing yacht. [Final Year Project]
Bisol, Paolo. (1999). An Offshore Cruising Yacht for Fast Bluewater Passages. [Final Year Project]
Bivi, Davide. (2002). An Open 50' for Adriatic races. [Final Year Project]
Bivoit, Martin. (2004). Preliminary design for a Max Z86 racer. [Final Year Project]
Bonomo, Arturo. (2010). Preliminary design of 80' performance cruiser sloop. [Final Year Project]
Booth, Richard. (2005). Design of a custom 60' cruising yacht for short-handed sailing combining luxury, style and high performance. [Final Year Project]
Boronat, Jordi. (2011). Preliminary design of a 40’ IRC racer/cruiser. [Final Year Project]
Bossy, Nicholas. (2003). Preliminary design of a 17m luxury sportfishing vessel. [Final Year Project]
Botes, Stephen. (2010). Preliminary design of an ORC GP33 racing yacht. [Final Year Project]
Bourgeois, Bertrand. (2001). A trailer-sailer for amateur boatbuilding. [Final Year Project]
Boutserin, Johan. (2010). Preliminary design of a Mini 650. [Final Year Project]
Brachet, S. (2000). Preliminary Design of a Lifeboat for the Coasts of Brittany. [Final Year Project]
Bradford, Clifford A.. (2010). Preliminary design of a 10m offshore racer/cruiser catamaran. [Final Year Project]
Bradley-Watson, Toby P.. (2003). An investigation into the manufacturing techniques of the sports car industry and their possible implications in the power craft industry. [Final Year Project]
Brancher, A.C.. (2003). Non destructive testing in small craft surveying. [Final Year Project]
Briggs, Christopher. (2010). Preliminary design of a multi purpose ferry. [Final Year Project]
Briggs, David Matthew. (2009). Conversion of a Clipper 60’ ocean race yacht to a family cruising vessel for the private and charter market. [Final Year Project]
Brin, Kevin. (2012). Design and Production of an 82ft Sailing Catamaran Intended for Media Application. [Final Year Project]
Broad, Andrew. (2001). The preliminary design of a 110' luxury sailing yacht. [Final Year Project]
Brown, Grant. (2012). The Design of a 35m Pocket Superyacht. [Final Year Project]
Brown, Paul. (1999). The preliminary design of a sail training vessel. [Final Year Project]
Browning, Christopher. (2011). The design of a 45ft superboat. [Final Year Project]
Brun , Lucas. (2013). The F.P.E.C. ( Fast Personal/Equipment Carrier) wind-farm support boat. [Final Year Project]
Buckley, Warwick. (2001). Borealis 42 - ultra light (offshore) cruising boat. [Final Year Project]
Buckley, Jami. (2013). B78 Heart-break concept. [Final Year Project]
Cabeceran, Pau. (2013). Preliminary design of a 65 foot L.F.C. slender hull. [Final Year Project]
Cairns, Lawson. (2004). 75ft luxury powerboat. [Final Year Project]
Can, Ercan. (2010). Preliminary design of a day trip boat for Turkish coasts. [Final Year Project]
Canivenc, Elie. (2002). 45' hard chine ocean-going cruiser. [Final Year Project]
Canovan, Guy. (2000). The preliminary design of a 40' upwind racing yacht. [Final Year Project]
Capdevielle, Michael Gay. (2002). Scuba diving support boat. [Final Year Project]
Capua, Daniele G. (2007). Preliminary design of a class 40 cross Atlantic racer. [Final Year Project]
Cardin, Antoine. (2005). 8m trailable sport boat. [Final Year Project]
Carey, Joel. (2011). 30ft inshore/offshore racing multihull. [Final Year Project]
Cariou, Mathieu. (2005). Preliminary design of Open 40' Mery. [Final Year Project]
Carreno, Gaston. (2015). Design of a 45' cruising yacht with wheetchair accessibility. [Final Year Project]
Cartier, Thibault. (2007). Design of a 45 ft training sailboat. [Final Year Project]
Cecchinato, G. (1999). The design of a 33' offshore racing yacht with a canting keel. [Final Year Project]
Chalmers, Margaret. (2009). Design of a yacht suitable for round-the-world amateur one-design racing and sail training. [Final Year Project]
Chartier, Simon. (2008). Preliminary design of a 30 feet racer with canting keel. [Final Year Project]
Chartier, Simon. (2008). Preliminary design of a 30 feet racer with canting keel. [Final Year Project]
Chiappini, Christiana. (2001). A round the world 40' fast sailing cruiser. [Final Year Project]
Chivilo, Francesco. (2013). 50 feet offshore cruiser racer double handed. [Final Year Project]
Christopher Barlow, CB and Tychonas Michailidis, TM and Gordon Meadow, GM and John Gouch, JG and Eshan Rajabally, ER. Using immersive audio and vibration to enhance remote diagnosis of mechanical failure in uncrewed vessels. In: International Conference on Immersive and Interactive Audio, AES, 2019 March 27–29, York.
Christophers, Johannes. (2007). Design of a Volvo Open 70. [Final Year Project]
Ciampalini, Stefano. (2005). Preliminary design of a mini transat 6.5. [Final Year Project]
Cigliana, Tommaso. (2012). 50ft Sailing One Design for Offshore Racing. [Final Year Project]
Clough, Matthew John. (2015). The conversion of a 19m search & rescue vessel into a luxury powerboat. [Final Year Project]
Coles, Simon. (2005). Design of a transpac 52 race yacht. [Final Year Project]
Collett, George David Smedley. (2013). Design of a 72' performance cruiser. [Final Year Project]
Connell , Brendan. (2013). Preliminary design of MK VI patrol boat. [Final Year Project]
Conway, C. (2005). 15m steel 'rule-beating' fishing vessel. [Final Year Project]
Cooper, Cameron. (2011). The 42 meter Sportsman's superyacht. [Final Year Project]
Cooper, Steven Robert. (2010). An investigation in the design and structural design of a modern six metre class racing yacht complying to the international six metre rule. [Final Year Project]
Corre, Yann le. (2003). 50ft cruiser-racer catamaran. [Final Year Project]
Courage , Alice. (2015). The design and production of a performance keelboat. [Final Year Project]
Cowell, Peter D.. (2010). Design optimisation of an IOR Mini Tonner for short handed IRC racing. [Final Year Project]
Crawley, Peter. (2013). Remotely accessed tracking device. [Final Year Project]
Crawley, Peter. (2013). A report concerning the design and construction of a remotely accessed tracking device. [Final Year Project]
Creer, Harry. (2005). A preliminary design for a small swath petrol craft. [Final Year Project]
Cristobalena, Enrique. (2004). Design of an IMS 50' racer. [Final Year Project]
Crook, Stephen John. (2010). The design of a shoal draft daysailor and construction kit. [Final Year Project]
Cross, Stephen J. (2009). The application of high quality maritime simulator training to improve safety and economy in shipping operations. PhD thesis, Southampton Solent University [Validated by Nottingham Trent University].
Cruzol, Pierrick. (2005). Preliminary deisgn of a 35ft cruising trimaran. [Final Year Project]
Cunningham-Burley, Jack. (2015). The Jupiter Runabout. [Final Year Project]
Curervas-Mons, Santiago. (2011). Preliminary design of a Transpac 52. [Final Year Project]
Cussonneau, Aymeric. (2003). Design of a 40ft cruiser-racer. [Final Year Project]
Cutting, A. (1998). Environmentally friendly Broads cruiser. [Final Year Project]
D'Alcorn, Christopher. (2006). Rigid inflatable boats are built in many different ways, is there a reason for this? Is this due to cost, speed of manufacture or technique? [Final Year Project]
D'Ubaldo, Olivia. (2013). ULDB 45-Design & production investigation. [Final Year Project]
Dabbadie, Yann. (2000). Bouillarta - Orma 60 trimaran with special study on seakeeping. [Final Year Project]
Daniels, Simon. (2018). Autonomous ships: Legal issues (draft). Draft unpublished at date of uploading, 6 September 2018, (Unpublished)
Davison, Tom. (2010). Design of a 12m sports fishing boat. [Final Year Project]
Davy, François-Boris. (2002). One off 29 - a custom cruiser-racer. [Final Year Project]
De Angelis, Barbara. (2008). Emilia 100' - Preliminary design of a luxury sailing yacht. [Final Year Project]
De Beaufort, Axel. (2000). A 6.5m boat for the Mini-Transat. [Final Year Project]
De Freitas, Luke. (2011). The preliminary design and build philosophy for a 45ft sport fishing yacht. [Final Year Project]
De Guillebon, Alexis. (2001). The preliminary design of an Open 50' trimaran. [Final Year Project]
De Lamotte, Tanguy. (2000). The design of an 18ft foil assisted sailing catamaran. [Final Year Project]
Decru, David. (2005). BEC 65' Mediterranean fast motor yacht. [Final Year Project]
Dejeanty, J.B.. (2001). Preliminary design of an "economical" Open 60'. [Final Year Project]
Delaporte, Matthieu. (2014). Prelininary design of an 8.50 metre Pacific Proa. [Final Year Project]
Dengate, Colin. (2003). Preliminary design of 45ft IRM monohull racing yacht. [Final Year Project]
Denness, Nicholas Winston. (2012). Preliminary Design For A 16m Pilot Boat For Sydney. [Final Year Project]
Derville, Estelle. (2003). Foilborn formula 18. [Final Year Project]
Dewavrin, Juliette and Souppez, Jean-Baptiste. Experimental Investigation into Modern Hydofoils-Assisted Monohulls: How Hydrodynamically Efficient are they? International Journal of Small Craft Technology, (In Press)
Dixon, Matthew. (2010). Design of a 50 -70 foot Slender Hull motorboat. [Final Year Project]
Doyotte, Damien. (2010). Design of a new Class 40 with study of potential constuction in flax fiber. [Final Year Project]
Drake, Robert. (2013). Fuel economy data for straddle carrier operators. [Final Year Project]
Drayton, Martin. (2000). Preliminary design of a fast carriage / slipway launch lifeboat for the RNLI. [Final Year Project]
Dubillot, Thierry. (2001). The design of a 9.5m racing yacht for the "Classe Figaro". [Final Year Project]
Dubois, Soizic. (2001). The design of a formula 28 catamaran. [Final Year Project]
Dujon, Matthieu. (2008). Preliminary design of a 54 feet aluminium ketch. [Final Year Project]
Duthoit, Charles-Henri. (2009). Aluminium Vs composites for a superyacht superstructure. [Final Year Project]
de Damborenea, Juan Ignacio. (2005). The design of a day sailing single handed classic wooden yacht. [Final Year Project]
de Navacelle , Felix . (2013). Preliminary design of a family circumnavigation cruising yacht. [Final Year Project]
de Saint Font, Paul. (2000). Hybrid lobsterboat. [Final Year Project]
de Vries, Teun. (2004). Large composite (super) structures on yachts. [Final Year Project]
de la Haye, Thomas Robert Nelson. (2007). Can Regard, a 1993 Brixham mule trawler yacht be converted to a sail training vessel with an unrestricted area of operation? [Final Year Project]
Easton, Darren Matthew. (2011). A preliminary design for a multi-role police vessel for the River Thames. [Final Year Project]
Eaves, Andrew. (2003). The design of add-on sleeping accommodation for a rigid inflatable boat. [Final Year Project]
Edwards, Stephen. (2009). Improving production of the Pacific 32. [Final Year Project]
Edwards, Barnaby. (2010). Design of a trans-Atlantic motoryacht. [Final Year Project]
Edwards, william. (2013). Preliminary design of a 35m motor yacht with an investigation into propeller shaft enclousures. [Final Year Project]
Ellvers, Alexander. (2003). What regulations need to be fulfilled for 'Jenny May' to be MCA compliant. [Final Year Project]
Erwann, Lebel. (2003). Oceanographic primary researches sailing catamarans. [Final Year Project]
Eustace, John. (2008). The feasibility of a TP52 cruiser / racer production version. [Final Year Project]
Eustache, Benjamin. (2003). Self build trimaran. [Final Year Project]
Evans, Christopher G. (2008). Electric powered passenger ferry - a performance feasibility investigation for operation in Plymouth harbour. [Final Year Project]
Fabbri , Matilde. (2013). Aria45-elegance first. [Final Year Project]
Fenlon, Jack. (2012). Catamaran Ferry. [Final Year Project]
Finatti, Pier Giorgio. (2000). The design of a 17m fast patrol boat. [Final Year Project]
Fish, Tony Robert. (2006). 24 metre modern classic charter yacht. [Final Year Project]
FitzGerald, Ed. (2013). The design of a fuel efficient motor catamaran. [Final Year Project]
Fitzgibbon, Joseph. (2015). The design of a 24-metre sailing yacht for global cruising. [Final Year Project]
Fletcher-Walker, Christian. (2005). Viability report of re-developing 25ft (8m) sports-boat and putting back into production. [Final Year Project]
Fluhrer, Jonathan. (2015). The preliminary design of a 24m performance racer-cruiser. [Final Year Project]
Forcadell Camacho, Juanjo. (2011). Semi displacement concept boat with similar performance to planing hull. [Final Year Project]
Ford, Benjamin and Jiang, James and Todd, Victoria and Todd, Ian. Measurements of underwater piling noise during nearshore windfarm construction in the UK potential impact on marine mammals in compliance with German UBA limit. In: 24th international congress on sound and vibration , 23-27 July 2017, London.
Ford, Robert. (2000). A fast offshore cruiser. [Final Year Project]
Fortabat, Alexandre. (2000). The design of a 10m match racer. [Final Year Project]
Fowler, Gareth Rhys. (2012). Fast Ferry Conversion. [Final Year Project]
Fox, William. (2010). Preliminary design of a 57ft, round the world, modern classic cruiser. [Final Year Project]
Francesco, Mattia Di. (2012). Preliminary Design of A 60 Foot Modenr-classic Sloop with An Investigation In Wood Technology. [Final Year Project]
French, William. (2005). A redesign of the Beneteau 40.7 for optimised racing performance. [Final Year Project]
Gallagher, Anthony and Johnson, D and Tiers, C and Glegg, G. (2004). Constructs of sustainability in coastal management. Marine Policy, 1 May 2004, 28 (3), pp. 249-255
Galley, Michael. (2009). UK port development in environmentally designated areas. Masters thesis, Southampton Solent University.
Gandarias, Rocio. (2011). Preliminary Design of A 40' Day Sailor. [Final Year Project]
Garagnani, Marco. (2004). The Preliminary Design of a Volvo Open 70’. [Final Year Project]
Gardner, Alexander. (2015). The design of an 8m kit-built high-performance keelboat. [Final Year Project]
Gardner, Alexander William. (2015). Conversion of a 55ft pilot boat to a luxury family cruiser. [Final Year Project]
Gardner, Mark. (2003). Preliminary design of a 50ft cruiser racer. [Final Year Project]
Gatfield, David. (1999). Are Current Risk Management Strategies within the Commercial Shipping Industry Adequate? Proceedings of the Learning from Marine Incidents Conference., 1999,
Gatfield, David. (1999). Can Cognitive Science Improve the Training of Industrial Process Operators? Journal of Safety Research, 1999, 30 (2), pp. 133-142
Gauvain, Etienne. (2008). Design of a new Class 9.50 sailboat. [Final Year Project]
Geary, Ben. (2004). Does the RYA need to introduce engine guidelines for safety boats. [Final Year Project]
Gee, Roger. (2003). Feasibility study: converting a 1955 ex-Yugoslavian cargo-passenger ferry into a large commercial yacht. [Final Year Project]
Gelabert, Joan. (2005). The design of a luxury performance sailing superyacht. [Final Year Project]
Germond, Fabrice. (2002). A Transat 6.50m boat with daggerboard comparison. [Final Year Project]
Ghezzi, Giulia. (2010). Preliminary design of a very slender high speed craft. [Final Year Project]
Ghisalberti, Alessandra. (2013). 54' Sportfisherman design and build philosophy. [Final Year Project]
Gifford, Jack Ross. (2008). Design of an international eight meter class racing yacht with investigation into appendage design. [Final Year Project]
Girard-Claudon, Benoit. (2000). A preliminary design for a 43.5m multi-purpose catamaran. [Final Year Project]
Girotti, Gianguido. (1999). GAE: the design of a 90ft high performance cruiser. [Final Year Project]
Goldenberg, Nicolas. (2005). Mini 6.5 with CTR keel system. [Final Year Project]
Goldsmith, Daniel J.. (2002). The preliminary design of a sea fisheries research / survey vessel. [Final Year Project]
Goldstein, Ran. (2005). The design of shorthand performance cruising yacht. [Final Year Project]
Gonzalez-Cela, Javier. (2002). IMS 35. [Final Year Project]
Goren , Alon. (2013). The preliminary design of a 70 ft. motor catamaran. [Final Year Project]
Gourdon, Erwan. (2005). Open 30 development. [Final Year Project]
Goutard, Maxime. (2009). Preliminary design of a 100' high performance cruiser/racer. [Final Year Project]
Grady, Todd. (2011). Preliminary design of a 15m, round the world cruiser. [Final Year Project]
Grandjacques, Xavier. (2004). 60' aluminium cruiser. [Final Year Project]
Grasman, Alex. (2011). Design of a 16 metre slender semi-displacement power yacht. [Final Year Project]
Gravina, Francesco. (2015). Fast performance tender. [Final Year Project]
Grillandini, Leanne. (2008). Preliminary design of a ferry operating within the Eastern Solent. [Final Year Project]
Grimes, Ruairi . (2015). Design and construction of a 55 foot cruising yacht. [Final Year Project]
Grison, Vincent. (2010). A design for a modern 24 metres classic yacht. [Final Year Project]
Grossmann, Erwan. (2007). Design of the Figaro 3 9.5m racing yacht. [Final Year Project]
Grove, Thomas A.. (2013). The design of a 19 meter multi-masted catamaran for chartered use. [Final Year Project]
Guell, Alvaro and Souppez, Jean-Baptiste. (2018). Combining modern hydrofoils and classic wooden yachts. In: British Conference of Undergraduate Research.
Guglielmo, Giotto. (2009). Preliminary design of Corto Maltese: a 65 foot IRC yacht. [Final Year Project]
Guilbaud, Xavier. (2000). A 12 metre high performance cruising trimaran. [Final Year Project]
Guirriec, Thomas. (2005). The preliminary design of a 36ft fast cruising catamaran. [Final Year Project]
Gutierrez, Inigo Oliver. (2013). Design of a 24 metres efficient yacht. [Final Year Project]
Hadley, Michael Anthony. (2000). Remote pilotage and enhanced navigation assistance. PhD thesis, Southampton Solent University [Validated by Nottingham Trent University].
Hall, James Kevin. (2003). The importance of after-sales and warranty procedures for yacht manufacturers. [Final Year Project]
Hallam, M. (1998). An 18m yacht for arctic sailing. [Final Year Project]
Hallpike, Tim. (2010). Fair seas. Public Service Review - European Union, April 2010, 19,
Halstrick, Philipp. (2001). 13.5 cold moulded cruising yacht, analysis of the laminated hull shell. [Final Year Project]
Hanger, Christopher Graham. (2015). Design and production plan of a 24m luxury power yacht. [Final Year Project]
Hansen, Heikki. (2000). 24m fast cruising catamaran power-sailer. [Final Year Project]
Hardy, Nicholas. (2003). Preliminary design of a luxury yacht for racing and charter. [Final Year Project]
Harper, Michael. (2010). Design and build philosophy of a wooden super yacht tender. [Final Year Project]
Hart, David. (2003). The preliminary design of a 24m blue water cruising yacht. [Final Year Project]
Hayward, Terry William. (2009). An investigation into the feasibility of converting 'Ocean Phoenix' into a sail training yacht. [Final Year Project]
Heath, Megan. (2013). Kinect for rehab. [Final Year Project]
Hemingway, Thomas David. (2015). Small scale production of a 60 foot lifting keel sloop. [Final Year Project]
Henderson, Alistair. (2012). Design of A New Coastal (RNLI) Lifeboat Specifically For The Scottish Hebrides. [Final Year Project]
Hermes, Vincent. (2008). Kitset production of an historic wooden boat. [Final Year Project]
Hertzog, Boris. (2003). Design of ultra light displacement wooden boat. [Final Year Project]
Heuser, Benjamin. (2004). The preliminary design of a 105ft, 50 knot custom motor yacht. [Final Year Project]
Heyberger, Yapp. (2002). The preliminary design of a single-handed Open 60 with a 2-D keel. [Final Year Project]
Hoglund, V. (1999). A 40' cruiser / racer for the northern Baltic sea. [Final Year Project]
Hollingsworth, James. (2012). Conversion of a Sail Training Yacht to a Private Yacht. [Final Year Project]
Holloway, Gareth James. (2003). An investigation into existing survival equipment / systems and the possibility of applying current technology to a new design. [Final Year Project]
Holloway, Matthew. (2010). Preliminary design of a hybrid superyacht tender. [Final Year Project]
Holman, Simon Keith. (2005). The design of a small high latitudes expedition yacht. [Final Year Project]
Holmes, D. (1998). Preliminary design for a 16m oil spill response vessel for the port of Southampton and locality. [Final Year Project]
Holste, Stefanie. (2011). Design of A Family-friendly Performance Sailing Yacht. [Final Year Project]
Hornby, Stephen Luke. (2010). Quick response oil containment device for accidental discharge of oil from vessels. [Final Year Project]
Houwer, Guillermo E.. (2015). Preliminary design of a modern Caribbean express cruiser. [Final Year Project]
Hu, Liang and Naeem, Wasif and Rajabally, Eshan and Watson, Graham and Mills, Terry and Bhuiyan, Zakirul and Salter, Ivor and Pekcan, Claire. (2019). A multiobjective optimization approach for COLREGs-compliant path planning of autonomous surface vehicles verified on networked bridge simulators. IEEE Transactions on Intelligent Transportation Systems, 2019, (In Press)
Hudson, Allan. (2005). An investigation into the mode of failure secondary bonding. [Final Year Project]
Humphreys, Tom. (2006). Design of an ORC GP42 racing yacht. [Final Year Project]
Ibanez, Javier. (2014). 48 HPR inshore racing boat design. [Final Year Project]
Inclan Campo, Gonzalo. (2000). A 48ft sport cruiser for the Balearic Islands. [Final Year Project]
Ingouf, Romain. (2009). Initial design of a one design yacht for "Tour de France a la Voile". [Final Year Project]
Irvine, Richard. (2000). The preliminary design of a charter sports fisherman. [Final Year Project]
Jaspe, Borja. (2014). Preliminary design of a Blue Water cruising yacht. [Final Year Project]
Jean Jarry, D. (1998). The design of a 12m 'weekend cruise' power boat. [Final Year Project]
Johnson, D. (2006). Providing ecotourism excursions for cruise passengers. Journal of Sustainable Tourism, 1 January 2006, 14 (1), pp. 43-54
Johnson, D and Phillips, M R. (2004). Mitigation or compensation: a critical review of two major UK maritime environmental impact assessments. In: Littoral 04, Aberdeen.
Johnson, D and Smith, H D and Potts, J S. (2005). Challenges and opportunities for coastal recreation and tourism at the 21st century. Routledge, pp. 157-170. ISBN 0-415-32945-0
Johnson, Michael. (2015). Modular composite production. [Final Year Project]
Joseph, Thomas and Souppez, Jean-Baptiste. (2018). Development and growth of the Thames A-Rater Fleet. In: British Conference of Undergraduate Research.
Jouan, David. (2008). Preliminary design of a charter sailing yacht for whale watching in Canada. [Final Year Project]
Jouan, David. (2008). Preliminary design of a charter sailing yacht for whale watching in Canada. [Final Year Project]
Jullien, Thomas. (2009). Preliminary design of a 35 foot inshore racing monohull and an investigation of the performance of a hydrofoil stabilization system. [Final Year Project]
Jupp, Matthew Simon. (2010). Design of a new passenger ferry for the River Mersey. [Final Year Project]
Kaczor, Scott. (2003). An investigation into the significance of the effect of safety equipment on boat speed. [Final Year Project]
Kerignard, Thomas. (2007). Preliminary design of a Mini 6.50. [Final Year Project]
King, Felix. (2001). The preliminary design of a harbour tug for the Solent region. [Final Year Project]
Koc, Beytullah Emre. (2009). The alarming problem in shipping industry; lack of seafarer: an analysis of the global shortage and in case of Turkey. Masters thesis, Southampton Solent University.
Konig, Roland. (2004). The preliminary design of a 36 foot fast cruising catamaran in hard chine plywood construction. [Final Year Project]
Kopf, Victor. (2013). A 24m Neo-classic yacht. [Final Year Project]
Kozlik, OV. (2004). Design conversion of a 1951 surveying vessel into a luxury explorer yacht suitable for charter. [Final Year Project]
Laine, Vincent. (2004). The design of a fast and economic sailing yacht. [Final Year Project]
Lambert, Christopher. (2011). The preliminary design and production philosophy of a Downeast style motor yacht to be built in Trinidad. [Final Year Project]
Lamble, A.J.. (2001). The design of a 9m trimaran with novel rig. [Final Year Project]
Langholz, Claire Nicoll. (2006). The design of a wheelchair accessible sailing yacht. [Final Year Project]
Laurens, Jean-Henri Georges. (2008). Preliminary design for a harbour tug with fire fighting option. [Final Year Project]
Law, Christopher. (2006). The design of a 15 metre trawler style flybridge motor yacht with an investigation into the potential use of propeller tunnels. [Final Year Project]
Le Manchec, Antoine. (2007). Preliminary design of a 4S feet cruising catamaran with an investigation on performances. [Final Year Project]
Le Meur, Kevin. (2008). Design of a 40ft charter catamaran "the Freerider" with special reference to a novel stepped hull. [Final Year Project]
Leahy, Eoin. (2001). The preliminary design of an IRM 10.7m level rater. [Final Year Project]
Lebailly, Vincent. (2005). Yapado 43. [Final Year Project]
Leflot, Clement. (2005). The preliminary design of an Open 60' IMOCA, with a special comparative study on hydrodynamic performances. [Final Year Project]
Leppala, Lauri. (2011). Optimisation of 43ft Cruiser-Racer Sailing Boat. [Final Year Project]
Leroy, Christopher. (2010). The design of a 60’ high efficient motor yacht. [Final Year Project]
Lieutaud, Samuel. (2000). The preliminary design of a tug for the Mayotte Island. [Final Year Project]
Lingley, Matthew. (2009). A design for a modern 50 square metre Seefahrtkreuzer. [Final Year Project]
Loeff, Joris. (2003). "Dead" FRP yachts are a growing problem ; how can we recycle them? [Final Year Project]
Low, David. (2000). A performance sailing yacht for corporate charter. [Final Year Project]
Lucet, Quentin. (2003). High performance Open 50 with wing mast and 2D keel system. [Final Year Project]
Lunn, Stuart. (2000). Preliminary design of a Bermuda ferry. [Final Year Project]
Lutter, Matthias. (2004). A preliminary design for a 53'catamaran suitable for disabled sailing. [Final Year Project]
Lux, Dominik. (2009). Preliminary design of an IMOCA Open 60 for development of new class rules. [Final Year Project]
lindén, ville and Souppez, Jean-Baptiste. (2018). Sailing towards sustainable future with wooden cargo schooner. In: https://www.researchgate.net/publication/324532550_Sailing_Towards_Sustainable_Future_with_Wooden_Cargo_Schooner.
Mackay, Matthew. (2011). Preliminary design of a pair of tenders for the mega yacht M/Y Coral Island. [Final Year Project]
Maggiorelli, Andrea. (2003). The preliminary design of an Open 35ft for the Istar. [Final Year Project]
Malotaux, Eric. (2002). Formula 28' trimaran. [Final Year Project]
Maltby, James Robert. (2012). Design of a 15m Sail Training Vessel. [Final Year Project]
Mancini, Benoit. (2012). Preliminary Design of A 50 Feet Plywood Blue Water Cruiser. [Final Year Project]
Marchant, P. (1998). A one design inshore racing yacht. [Final Year Project]
Martin, Boris. (2010). Design of a 50' sailing multihull for ocean racing. [Final Year Project]
Martin-Raget, Colin. (2015). Design of an AC62 for the 35th America's Cup. [Final Year Project]
Martino Lopez, Laia. (2010). Design of a high speed charter powerboat for the Balearics. [Final Year Project]
Mathas, Evangelos. (2003). A case study regarding the construction of a traditional Eastern Mediterranean (Greek) sailing vessel in wood-epoxy construction. [Final Year Project]
Mathez-Loic, Tristan. (2010). Preliminary design of a 33 foot lake racer to the new class rule "LEM 33". [Final Year Project]
Mayr, Oscar. (2013). IRC 72 Mini Mixi racer design & development. [Final Year Project]
McAndrew, Martin. (2007). Design proposal for a sail training ship, in the style of the Mary Rose. [Final Year Project]
McCallum, Andrew. (2008). A feasibility study on "a environmentally friendly ferry for use on inland waterways". [Final Year Project]
McCallum, Luke. (2013). Research into the extent of modern timber yacht surveying. [Final Year Project]
McConnell, Rob. (2000). An investigation into the design of a Six Meter. [Final Year Project]
McConnell, Robert E.. (2001). The design of a SWATH for corporate entertainment. [Final Year Project]
McDowell, Tim. (2003). The preliminary design of an IRM 52. [Final Year Project]
McHale, Robert Edward. (2010). Opportunities for the use of composites in aluminium high-speed ferry construction. [Final Year Project]
McMahon, Conor. (2011). Preliminary design of a modern cruising catamaran utilising a traction kite for propulsion. [Final Year Project]
Mead, Oscar. (2011). Preliminary Design For A Solo Round The World Race Boat. [Final Year Project]
Mears, Steven. (2002). A 40ft trimaran for single and shorthanded trans-Atlantic racing. [Final Year Project]
Meredith, Peter R.. (2003). An investigation into the effect of reducing mast mass on the sailing performance of racing yachts built in the early 1900s. [Final Year Project]
Meur, Bastien. (2007). Design of a 7' ocean racer concept. [Final Year Project]
Michailidis, Tychonas and Barlow, Chris and Meadow, Gordon and Gouch, John and Rajabally, Eshan. (2019). Enhance engine room diagnostics through audio-focused VR simulation. In: Interact2019, 2-6 September 2019, Paphos, Cyprus. (Submitted)
Middleton, Martin. (2013). Coolant recovery project. [Final Year Project]
Mignard, Yves. (2000). The preliminary design of a safer open 60. [Final Year Project]
Miles, Stuart Peter David. (2007). The feasibility and method of the direct manufacture of the BR35s high speed power boatunder resin infusion. [Final Year Project]
Millington, Matthew. (2006). An evaluation of chopped strand mat and woven roving. [Final Year Project]
Minvielle, Martin. (2005). Fun design cruiser 34'. [Final Year Project]
Moise, Sebastiano. (2013). S'40 Racing yacht to the HPR. [Final Year Project]
Monaco, Fulvio. (2014). A preliminary design of an hydrofoil inshore racing yacht for the centomiglia with a focus on its performance prediction. [Final Year Project]
Morris, David Huw Daniel. (2005). Design of a 12 metre GRP power catamaran. [Final Year Project]
Moussion, Theophile. (2012). Preliminary Design of High Speed Interceptor. [Final Year Project]
Munro, B. (1998). The preliminary design of a fast ferry for the Isles of Scilly. [Final Year Project]
Muratet, Alexis. (2001). Open 40' for North Atlantic racing. [Final Year Project]
Murphy, Paul John. (2007). An investigation into a flat pack cored FRP dinghy/keelboat construction. [Final Year Project]
Nice, Adam. (2009). Kit boat design. [Final Year Project]
Nordgren, Magnus. (2010). Preliminary design of a 43 foot, performance cruising sailboat for Swedish waters. [Final Year Project]
Notley, Andrew William. (2003). A comparison between propellor and waterjet propulsion. [Final Year Project]
Ntougia, Stavroula. (2009). Internationa convention for the safe and environmentally sound recycling of ships of IMO - a critical analysis. Masters thesis, Southampton Solent University.
Ntougia, Stavroula. (2009). The scrap market and the Hong Kong international convention for the safe and environmentally sound recycling of ships of IMO : a critical analysis. Masters thesis, Southampton Solent University.
O'Donoghue, Helena. (2011). Design concept & business development aspects of day sailing operations May 2011. [Final Year Project]
O'Hara, Niall. (2005). A preliminary design of a one-design club racing yahct. [Final Year Project]
O'Neill, Chris. (2011). The Design of a 7.8m Sports Boat. [Final Year Project]
O'Sullivan, Matt. (2005). [Preliminary design of high speed luxury powercraft...]. [Final Year Project]
Oakley, Tom. (2011). The initial design and production of a 40ft environmentally friendly cruising yacht. [Final Year Project]
Olivo, Gabriele. (2003). IMS design case study. [Final Year Project]
Olle, Sebastien. (2008). Survey and refit design for a Contessa 26 sailing yacht. [Final Year Project]
Olmos, Francisco Javier Aviles. (2011). FA Class 40 Design. [Final Year Project]
Olsen, Nikolaj Grondahl. (2003). A preliminary hydrofoil borne Orma 60 trimaran design, including a velocity prediction method. [Final Year Project]
Osler, Matthew. (2010). The conversion of a Challenger 72 endurance yacht into a luxury cruising and charter vessel. [Final Year Project]
Osman, Ak Hj Amar-Rizadi Pg Hj. (2005). Evaporator eductor pump. [Final Year Project]
Otton, William. (2004). A study into the conversion of a 'Challenge 67' racing yacht into a world cruising yacht. [Final Year Project]
Page, Andrew. (2011). A modern approach on a classic sailing yacht. [Final Year Project]
Pages, Filippo. (2011). Conversion of a 1980 Patrol Boat in Pleasure Yacht. [Final Year Project]
Palmer, Jeremy. (2001). A Micro cup class yacht. [Final Year Project]
Palmer, F.N.. (2002). A 15m assault and logistics landing craft. [Final Year Project]
Parrott, Nicholas James. (2008). A feasibility study of the setup of a company specialising in one off GRP replicas taken from wooden vessels. [Final Year Project]
Parry, Bryn. (2017). Virtual & Augmented Reality: but not as you know it ? In: VentureFest South - Pecha Kucha, 9th March 2017, Winchester Guildhall.
Parry, Bryn. (2015). The matrix and survivorship bias. In: SSBS Luchtime Research Seminars, January 2015, Southampton Solent University. (Unpublished)
Pasquini, Niccolo'. (2015). Preliminary design of 80 ft. featuring freestanding mast and soft sail wing. [Final Year Project]
Paterson, Mark. (2007). The conversion of a 30 metre tug into an Arctic explorer vessel, suitable for charter. [Final Year Project]
Patrix, Ronan. (2011). Design and production of a 28 footer sport trimaran. [Final Year Project]
Pearce, Katherine. (2003). A concept design for a smart material that detects microcracking in a composite laminate. [Final Year Project]
Pearce, Jack. (2007). A design of a luxury 70ft sailing yacht with dive boat / tender. [Final Year Project]
Peard, A. (2000). An investigation into the factors involved in the development of the deck plan for a large sailing yacht. [Final Year Project]
Pearson, Samuel T. (2008). Design of a 35 foot short handed yacht with both cruising and racing specification. [Final Year Project]
Pendleton, Oliver. (2005). The preliminary design of a Volvo 70. [Final Year Project]
Pere, Nicolas. (2013). Primarily design of a one-off 44 feet cruiser racer yacht with an alternative arrangement. [Final Year Project]
Peters, Sam. (2011). The Design of a Luxury 50ft Cruising Yacht. [Final Year Project]
Peyroche d'Arnaud, Louis. (2010). Preliminary design of a 70' cruiser ketch. [Final Year Project]
Pickles, Thomas Julian. (2004). Conversion of HMS Warrior to a fully functioning passenger ship, with an in depth cost evaluation of the re-fit process on a 20 year plan. [Final Year Project]
Pietruszka, Richard. (2013). Preliminary design of a 38ft blue water cruiser. [Final Year Project]
Pietrzak, Konrad. (2008). Design of 24m classic motor-yacht 'Inter Nos'. [Final Year Project]
Pignone, Francesco and Souppez, Jean-Baptiste. (2018). Applications of hydrogen fuel cell technology to the sustainable propulsion of leisure crafts. In: British Conference of Undergraduate Research.
Plant, Richard. (2010). The conversion of a 23m North Sea trawler into an exploration yacht. [Final Year Project]
Plissart, Adrien. (2001). Design of a 30ft sportive cruiser. [Final Year Project]
Polarglare, Balazs Illes. (2013). Eco-friendly adventure sailing yacht. [Final Year Project]
Polli, Matteo. (2002). Hull form evolution for a high performance superyacht. [Final Year Project]
Ponsford, Matthew G. (2015). Modular mould tool yacht production. [Final Year Project]
Pope, Charles Kitchener. (2012). Preliminary Design of A 20-Meter Fast Patrol Vessel. [Final Year Project]
Poppe, Urs Christian. (2001). A preliminary design of the new fire fighting vessel for the Duisburg industrial inland harbour. [Final Year Project]
Potter, Casper . (2015). 50‘ Long keeled cruising yacht. [Final Year Project]
Pouliquen, Tristan. (2002). Mini transat 6.5m - design and structural comparison. [Final Year Project]
Prevost, Antoine Lauriot. (2012). Preliminary Design Of A New Yacht For The World Match Racing Tour. [Final Year Project]
Pritchard-Gordon, Sam. (2004). The re-design of an existing Farr 52 hull into a performance cruiser/racer. [Final Year Project]
Pullen, Roger. (1998). Poly(itaconate) esters as marine antifoulants. PhD thesis, Southampton Solent University [validated by Nottingham Trent University].
Quevaine, Aldric. (2004). Preliminary design of the IRM 45 "Momette". [Final Year Project]
Quinn, Ralph. (2001). The preliminary design of a customs catamaran. [Final Year Project]
Rambaldi, Federico. (2000). A 50' flybridge cruiser. [Final Year Project]
Randall, Edward. (2002). A high latitudes sailing research vessel. [Final Year Project]
Rapp, Richard Alan. (2006). Hypothetical analysis of optimum boatyard production systems. [Final Year Project]
Ravignon, Charles. (2011). The design of a 45 feet luxury motor yacht with classic lines. [Final Year Project]
Redon, Tanguy. (2008). Preliminary design of a family oceanic cruiser of 40-45 feet. [Final Year Project]
Regourd, A C. (1999). A cruiser/racer for the millennium. [Final Year Project]
Revill, Guy Alexander John. (2008). The challenge 67 yacht, its suitability as a cruising yacht and the hull material options. [Final Year Project]
Ridley, Jonathan and Souppez, Jean-Baptiste R. G.. (2016). Modern yacht design. In: Wessex Round Table of Inventors.
Roberts, Timothy John. (2003). The advantages and disadvantages of introducing advanced composites into the civil industry. [Final Year Project]
Rodriguez, Oscar Andres Garcia. (2014). 45 m ASD multipurpose Tug boat. [Final Year Project]
Rosenthal, Joshua . (2015). FAWFSV Feasibility study: resistance prediction and preliminary design. [Final Year Project]
Ross, Charles J.. (2002). The preliminary design of a 65 knot sports cruiser. [Final Year Project]
Rother, Michael Craig. (2007). A study into the design of a high latitude expedition-style sailing yacht. [Final Year Project]
Rousselon, Nicolas. (2004). Volvo Open 70 with investigation into hull and appendages design. [Final Year Project]
Rovira Boluda, Enrique. (2010). Preliminary design of a 24 metre fast-cruising sloop. [Final Year Project]
Ruiz, Tomas. (2013). Preliminary design of an offshore racing yacht for the mini 6.50 prototype class. [Final Year Project]
Ryan, Christopher. (2014). Preliminary design of a 30 metre ketch for cruising the polar regions. [Final Year Project]
Sainson, Sebastien. (2011). Preliminary design of a Class 50 racing yacht based on the investigation of a new class rule. [Final Year Project]
Sainson, Rebecca . (2015). Preliminary design of a 45 feet racer cruiser. [Final Year Project]
Salaoru, Anda Elena. (2015). Preliminary design of a 78' planing motor yacht. [Final Year Project]
Salgado, Max. (2014). "45" Cruising sailing catamaran: an evaluation of alternative structure configurations. [Final Year Project]
Salkeld, Laura Jade. (2010). Manufacturing of a bespoke design for a limited production run. [Final Year Project]
Salokoski, Anton. (2006). Design of an international eight metre class racing yacht. [Final Year Project]
Salzes, Clement. (2008). 8m inshore cruiser Kayoc 26. [Final Year Project]
Sander, Thomas. (2011). Preliminary design of a Class 950 sailing yacht with plywood epoxy construction techniques. [Final Year Project]
Sarpkaya, Mehmet Kamer. (2011). 80ft weight sensitive 60+ knots high speed sport motoryacht. [Final Year Project]
Savage , Christopher. (2015). Design and build philosophy for a 60 ft luxury sailing yacht 'Savage 60'. [Final Year Project]
Scarani, S. (1998). Preliminary design of a 9m sport cruiser. [Final Year Project]
Schaich, Philipp A.. (2002). The preliminary design of a high performance daysailer. [Final Year Project]
Schipman, Henry-Paul. (2003). Preliminary design of a 12m one-off cruiser/racer yacht. [Final Year Project]
Scholfield, Ralph Peter. (2009). Is it viable to convert 'Ocean Phoenix 77' for luxury disabled access charter in unlimited operation? [Final Year Project]
Schweyer, Sophie. (2010). Preliminary design of a charter and research yacht for the Polar regions with reference to impact resistance. [Final Year Project]
Sciard, Amaury. (2011). Preliminary design of a 35' inshore racing multihull. [Final Year Project]
Scicluna, Matthew. (2013). Preliminary design of a 64 foot IRC racer-cruiser. [Final Year Project]
Scott-Mackie, Adam. (2014). The design of a 12m Canting Keel racing yacht with investigation into Keel Pin incline. [Final Year Project]
Segura, A. (1999). A one-design yacht for short-handed racing. [Final Year Project]
Seo, Seong-Gi. (2011). The Use of Pivot Point in Ship Handling for Safer and More Accurate Ship Manoeuvring. Proceedings of IMLA, 1 October 2011, 1 (29), pp. 271-280
Serratosa, Pablo. (2015). Preliminary design of an offshore 50' performance racer cruiser. [Final Year Project]
Serrault, Martin. (2012). Design of A Modern Classic Sailing Yacht. [Final Year Project]
Sevellec, Thomas. (2005). Preliminary deisgn of a sailing scientific research catamaran. [Final Year Project]
Sexton, Amber. (2004). An investigation into impact testing of epoxy resins and the reliability of its results. [Final Year Project]
Short, I. (1998). Design of a commercial fishing/workboat with a planing hull form. Other thesis, Southampton Solent University.
Sibiril, Sebastien. (2008). Preliminary design of a gull-wing mini 6.50. [Final Year Project]
Sitton, Paul. (2000). The preliminary design of a fast response anti-piracy vessel. [Final Year Project]
Sjuve, Alan. (2010). Super yacht tender/ limousine design and construction. [Final Year Project]
Smith, Kyle F. (2005). Shipboard Photovoltaic (PV) Solar System: Investigation into the uses of photovoltaic solar modules to produce electricity onboard merchant shipping. [Final Year Project]
Smith, Clive Martin. (2004). An investigation into copper epoxy antifouling and galvanic corrosion. [Final Year Project]
Smith, Simon Phillip. (2014). Preliminary design of a 30 M crew boat to support North Sea platforms west of Shetland. [Final Year Project]
Smits, Eric. (2012). Preliminary Design of a Research-Expedition Sailing Yacht. [Final Year Project]
Smyth, Timothy Michael. (2003). The initial design on an America's Cup class yacht. [Final Year Project]
Snow, Damian. (2004). The design of a purpose built dive R.I.B. [Final Year Project]
Soler, Alberto Soler. (2011). Preliminary Design of a 26ft Daysailor. [Final Year Project]
Souppez, Jean-Baptiste. (2019). Aerodynamics of downwind racing yacht sails. In: Royal Aeronautical Society (Farnborough Branch).
Souppez, Jean-Baptiste. (2018). Anchoring the Experience of Highly Diverse Students on the EMship+ Master: All Aboard! Dialogue:Journal of Learning and Teaching, June 2018, pp. 93-108
Souppez, Jean-Baptiste. (2018). Downwind sails, hydrofoils and carbon fibre: The dark side of racing yachts. In: 1st Solent Alumni Reunion.
Souppez, Jean-Baptiste. (2018). High performance racing yachts: an experimental comparison of the latest hydrofoil configurations. In: Uk Fluids Conference, Manchester.
Souppez, Jean-Baptiste. (2019). Hydrofoil configurations for sailing superyachts: Hydrodynamics, stability and performance. In: Design & Construction of Super & Mega Yachts.
Souppez, Jean-Baptiste. (2018). On highly cambered thin circular arcs at low Reynolds numbers. In: The 31st Scottish Fluids Mechanics Meeting.
Souppez, Jean-Baptiste. (2018). On highly cambered thin circular arcs at low Reynolds numbers. In: Uk Fluids Conference, Manchester.
Souppez, Jean-Baptiste. (2018). Peer Practice Exchange in Undergraduate Research. In: Solent Learning and Teaching Community Conferecne.
Souppez, Jean-Baptiste. Recent Advances in Downwind Sail Aerodynamics. 23rd Chesapeake Sailing Yacht Symposium,
Souppez, Jean-Baptiste. (2018). Structural Design of High Performance Composite Sailing Yachts under the New BS EN ISO 12215-5. Journal of Sailing Technology, 21 June 2018 (2), pp. 1-18
Souppez, Jean-Baptiste. (2018). Structural analysis of composite search and rescue vessels under the new BS EN ISO 12215-5. In: RINE Surv9 - Surveillance, Search and Rescue Craft, London.
Souppez, Jean-Baptiste. (2018). Supporting Students Engagement and Achievements through Online Micro-Lectures with Embedded Quizzes. In: Teaching in the spotlight: Learning from global communities.
Souppez, Jean-Baptiste. UK Principal Expert in Small Craft Structures Report on the Discussions inherent to the ISO 12215 in Paris 2018. Technical Report. British Standards Institution.
Souppez, Jean-Baptiste and Vazquez Bonome, Lucía. (2018). Micro-Lectures with Embedded Quizzes: an Innovative Use of Lecture Capture Technology. In: Solent Learning and Teaching Community Conference.
Souppez, Jean-Baptiste R. G.. (2018). Action research: Supporting lower achievers through micro-lecture captures with embedded quizzes. In: PGCert Learning and Teaching in Higher Education.
Souppez, Jean-Baptiste R. G.. (2013). Design and production of a one-off 32 feet wooden racing yacht dedicated to Southampton Solent University. Other thesis, Southampton Solent University.
Souppez, Jean-Baptiste R. G.. (2015). Design and production of a wooden Thames A Rater Class sailing yacht. Masters thesis, The University of Auckland.
Souppez, Jean-Baptiste R. G.. (2014). Development and Validation of a Computational Fluid Dynamics Hydrodynamic Model of the Stewart 34 for Velocity Prediction Program Applications. Masters thesis, The University of Auckland.
Souppez, Jean-Baptiste R. G.. Interdisciplinary pedagogy: a maritime case study. Dialogue Journal of Learning and Teaching,
Souppez, Jean-Baptiste R. G.. K Principal Expert in Small Craft Structures Report on the discussions inherent to the ISO 12215 in Dusseldorf 2017. Technical Report. British Standards Institution.
Souppez, Jean-Baptiste R. G.. (2016). Learning through exchanges: New academic partnerships for the Yacht Engineering Department. In: Solent Learning and Teaching Community Conference 2017, 23rd June 2017, Southampton Solent University.
Souppez, Jean-Baptiste R. G.. (2016). On the applications Of modern naval architecture techniques to historical crafts. In: Historic Ships.
Souppez, Jean-Baptiste R. G.. (2016). On the applications of modern naval architecture techniques to historical crafts. In: Historic Ships.
Souppez, Jean-Baptiste R. G.. (2017). Promoting student engagement through micro-lecture captures With embedded quizzes. In: Solent Learning and Teaching Community Conference 2017, 23rd June 2017, Southampton Solent University.
Souppez, Jean-Baptiste R. G.. (2018). Structural analysis of composite search and rescue vessels under the new BS EN ISO 12215-5. In: Surveillance, Search and Rescue Craft.
Souppez, Jean-Baptiste R. G.. (2017). UK Principal Expert in Small Craft Structures Report on the discussions inherent to the ISO 12215 in Amsterdam, 2017. Technical Report. British Standards Institution.
Souppez, Jean-Baptiste R. G.. UK Principal Expert in Small Craft Structures Report on the discussions inherent to the ISO 12215 in Berlin 2017. Technical Report. British Standards Institutions.
Souppez, Jean-Baptiste R. G.. (2018). Yacht engineering research. In: Institute for Energy Systems.
Souppez, Jean-Baptiste R. G.. (2016). An interdisciplinary approach to education: Case study of an academic exchange. In: Education & Professional Development of Engineers in the Maritime Industry.
Souppez, Jean-Baptiste R. G.. (2015). A student's take on education in the maritime industry. In: Education & Professional Development of Engineers in the Maritime Industry, Education & Professional Development of Engineers in the Maritime Industry.
Souppez, Jean-Baptiste R. G. and Hannam, James and Appleton, Joe. (2017). Microteaching, reflections of a Yachtsman, a Coder and a DJ. In: Solent Learning and Teaching Community Conference 2017, 23rd June 2017, Southampton Solent University.
Souppez, Jean-Baptiste R. G. and Hannam, James and Appleton, Joe and Khan, Osama. (2017). Microteaching: Reflections of a Yachtsman, a Coder, a DJ, and the Director of SLTI. In: Solent Learning and Teaching Institute CPD Workshop.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2016). Experimental yacht design. In: Southampton Science Café.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2017). Fostering maritime education through interdisciplinary training. In: International Conference on Maritime Policy, Technology and Education.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2017). Fostering maritime education through interdisciplinary training. In: International Conference on Maritime Policy, Technology and Education.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2016). Modern yacht design. In: Hythe Sailing Club.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2017). The challenge of modern yacht design. In: Royal Southampton Yacht Club.
Souppez, Jean-Baptiste R. G. and Ridley, Jonathan. (2017). The revisions of the BS EN ISO 12215. In: Marine Sector Showcase - Composite UK.
Souppez, Jean-Baptiste Roger Guillaume. (2013). Design and production of a one-off 32 feet wooden racing yacht dedicated to Southampton Solent University. [Final Year Project]
Souppez , Jean-Baptiste R. G. . (2015). A student's take on education in the maritime industry. In: Education & Professional Development of Engineers in the Maritime Industry.
Sousa, Ramiro. (2010). 20 metres modern cruising schooner. [Final Year Project]
Spirouz de Vendomois, Alban. (2004). Preliminary design of a 50 feet one-off day-boat. [Final Year Project]
Springett, Simon. (2004). Is it viable to harmonise all worldwide recreational craft manufacturing regulations into one internationally recognised standard? [Final Year Project]
Squire, Gary. (2013). Gas delivery and control system. [Final Year Project]
Steeper, Alex. (2011). Evaluation of a work boat production method. [Final Year Project]
Stevens, Jonathan. (2010). Preliminary design of a 46ft IRC competitive racing yacht. [Final Year Project]
Stevenson, Stuart. (2000). The preliminary design of a multi-purpose passenger catamaran for the Thames. [Final Year Project]
Stewart, J.R.. (2002). The design of a Thames A Class Rater. [Final Year Project]
Stewart, Cameron. (2015). The design conversion of a 26m workboat to a 26m leisure vessel. [Final Year Project]
Stone, Thomas. (2007). Production of Kissaki 28. [Final Year Project]
Stones, Graham. (2003). An investigation of powerboat drive systems. [Final Year Project]
Straker, Matthew Ian. (2000). An investigation into the safety and stability of open 60's. [Final Year Project]
Stromquist, Jorgen Beyer. (2010). The design of a 7.5m high performance sport boat: iboat 750. [Final Year Project]
Swaby, Stuart Alan. (2003). Preliminary design for a 27m luxury power catamaran. [Final Year Project]
Taillard, Olivier. (2011). Preliminary Design of a Class 950. [Final Year Project]
Tandonnet, Marc. (2002). Preliminary design of a 9.4m sailing boat for amateur boatbuilding. [Final Year Project]
Taylor, Rob. (2003). Preliminary design of IRM 50' racing yacht. [Final Year Project]
Tengvall, Stefan. (2004). Preliminary design of a 24 meter sailing yacht. [Final Year Project]
Terenzi, Nicola. (2013). Surf explorer 66. [Final Year Project]
Ternon, Jean-Baptiste. (2013). BILOUP-33 Twin keel cruiser boat. [Final Year Project]
Tessel, Itamar. (2015). A preliminary design of a 24m explorer yacht. [Final Year Project]
Thomas, Joseph and Souppez, Jean-Baptiste. (2018). Comparative performance prediction of historical Thames A Rater class designs (Presentation). In: RINA - Historic Ships, London.
Thomas, Joseph and Souppez, Jean-Baptiste. (2018). https://www.researchgate.net/publication/329529188_Comparative_Performance_Prediction_of_Historical_Thames_A_Rater_Class_Designs. In: RINA - Historic Ships.
Thompson, Michael. (2013). Fitness on submarines. [Final Year Project]
Thomson, Caleb M.. (2003). Design proposal for a 24m passenger pleasure craft for the Floating Harbour in Bristol. [Final Year Project]
Thorpe, Henry V.J.. (2002). The preliminary design of a 19m cruiser/racer with trans-ocean capabilities. [Final Year Project]
Tiernan, Christopher Joseph. (2015). Preliminary design and production of a 21m steam boat capable of obtaining the steam boat world speed record. [Final Year Project]
Tinson, Michael. (2003). The design of a day sailer for Mediterranean charter. [Final Year Project]
Tocci, Giacomo Michelini. (2008). Preliminary design of a luxury motor yacht. [Final Year Project]
Townrow, Christian Percy Clyde. (2015). A unique 18m high performance pleasure craft. [Final Year Project]
Townsend, Robert. (2010). To improve the survivability of vessel out to sea. [Final Year Project]
Tringale, Maximilian. (2014). Preliminary design of a 76 foot modern-classic cruiser-racer. [Final Year Project]
Troussier, Tara. (2006). Design of a Transpac 52. [Final Year Project]
Turnball, Ian Andrew. (2008). An investigation into the viability of resin infusion in small racing sailboats. [Final Year Project]
Twigg, H.K.. (2016). RIKE 2015 Award 1344 – Enabling widespread electronic corrosion monitoring in marine off-shore installations – Project Report Part 2. Project Report. Southampton Solent University, Southampton Solent University.
Twigg, Helena K.. (2016). Corrosion monitoring. In: Practice-Related Research, 20 May 2016, Southampton Solent University. (Unpublished)
Twigg, Helena K.. A review of current corrosion detection technology and how corrosion occurs. Technical Report. Southampton Solent University. (Unpublished)
Unerman, Timothy. (2003). Is using the material carbon fibre in the manufacture of yacht masts a viable option to aluminium? [Final Year Project]
Vallet, Stephan. (2001). "Genesis" - The foil assisted monohull concept, an alternative for offshore racing. [Final Year Project]
Vanhollebeke, Gaspar. (2011). Preliminary Design of A Class 40 Offshore Racing Yacht. [Final Year Project]
Varvaro, Simon Milovanovic. (2002). SEM44 - Preliminary design for a cruiser with lifting keel. [Final Year Project]
Velut, Paul. (2010). Open 60' advanced proposal. [Final Year Project]
Viant, Sebastien. (2004). Lady 33 - IMS/IRC design. [Final Year Project]
Villard, M. (1998). A 24m vessel for the French customs. [Final Year Project]
Vilt, Damien. (2004). Preliminary design of a 41 feet traditional Gaff Rig schooner for oceanic cruising. [Final Year Project]
Vinatea, Angel Rueda. (2013). Fixius 52, round the world fast cruiser. [Final Year Project]
Vincent, Ben. (2015). Conversion of a commercial trawler into an explorer yacht. [Final Year Project]
Vincent, Matthieu. (2003). Preliminary design of a luxury cruising high speed catamaran. [Final Year Project]
Volant, Gabriel. (2011). Prelminary Design OFfA 60' High Performance Lifting Keel Day Sailer. [Final Year Project]
Vrolijk, Alexander. (2011). Refit of a 22m twin screw motor yacht. [Final Year Project]
Waddell, Zak. (2000). The preliminary design of a 14m, 75 knot, cruiser / racer monohull. [Final Year Project]
Walton, James. (2003). What effect do styrene emissions have on the marine industry. [Final Year Project]
Wardropper, Steve. (2011). The development of a day sailor for bespoke production and subsequent conversion for small volume production. [Final Year Project]
Watts, Peter Roberts. (2006). The investigation and proposal of a high speed passenger craft for use in the isles of Scilly. [Final Year Project]
Wedemeyer, Nikolai. (2001). Workhorse 82' - preliminary design of an 82ft multi-purpose work boat catamaran. [Final Year Project]
Werner, Soeren. (2002). Design of a 7.5m sportsboat. [Final Year Project]
Wesley, Scott. (2015). Design of a 14m dive charter power catamaran. [Final Year Project]
Whatley, Alex. (2003). An investigation into post-curing methods of composite mouldings, applied to small boat building companies. [Final Year Project]
Whitcher, Alan. (2013). Situation awareness of marine control room operators. PhD thesis, Nottingham Trent University.
Whitcombe, Andrew. (2005). Turbine blade project. [Final Year Project]
Wiley, James Michael. (2004). A theoretical investigation of management disciplines and philosophies applied to yacht manufacturing companies. [Final Year Project]
Windsor, Crayke. (2011). The preliminary design and construction of a 22m catamaran car ferry. [Final Year Project]
Wise, B. (1998). The preliminary design of a modern lifeboat. [Final Year Project]
Wombwell, Ross Alexander. (2004). A study into reducing the environmental effect of the manufacture of a Fairline Phantom 40 motoryacht. [Final Year Project]
Woolgar, Daniel. (2010). Re-design of a TP52 into economical racing production version. [Final Year Project]
Wright, Tom William. (2012). Updating The Build Method of A 15m Patrol Vessel. [Final Year Project]
Wynne, GN. (2001). Preliminary design for a Versatile Coastguard Vessel (VCV). [Final Year Project]
Ye, Jilin. (2016). Additive manufacturing for maritime spare parts supply: An overview. In: 2016 International Conference on Maritime Policy, Technology and Education, 25-27 May 2016, Shanghai, China.
Ye, Jilin. (2016). Additive manufacturing in shipping industry - opportunities and challenges. In: 3D Printing: Development, Application and its Contribution to Local Economy, 5 July 2016, Southampton, United Kingdom.
Young, Kevin L. (2005). Design and manufacture of a new handwheel design. [Final Year Project]
Yussof, Azrin. (2005). Improved gas turbine efficiency: gT 823. [Final Year Project]
Zhang, Pengfei. (2016). Research on prevention of ship collisions with oil rigs. Journal of Shipping and Ocean Engineering, 18 September 2016, 6, pp. 279-283
Zolkipli, Mohd Safwan. (2005). Selecting a propeller for a newly built ship. [Final Year Project]